Stock Status - Discontinued. Wiikey 2 was great, but it now offers nothing new over devices like Drivekey/Wasabi/wiikey Fuion and Wode. These devices also work on a larger range of wiis. Goodbye wiikey 2!
Warning - There is a new type of Wii stores early November 2008. If you have a Australian PAL wii with the serial number of LAH1088 and over, you cannot use the wiiclip at all. The wii has black EPOXY glue all over it. Not to worry, click her to buy the Drivekey modchip, which works on all Wiis 100% solderless If you are in the UK/europe -- epoxy starts LEH224 and above. If you are in US/Canada...it starts at Lu611 and above.
A quick note: If you do not include your wii serial number in the order comments - we will solder this for d2c/d2c2/d2e consoles as the default configuration (since 80% of the consoles on the market are d2c/d2c2/d2e). If you have a d2b/dms console, and don't include your serial number - your product will arrive in a non working state. You will cause yourself and ozmodchips great frustration in getting it to work. If you cannot get it working you will need to send it back to us to get it resoldered, or change the clip if you have used it to many times. This will not be for free. Please, we beg you a million times, please please please include your serial number in the order comments! If your wii have been repaired by Nintendo, your serial number will not be an accurate indicator of the DVD drive inside, so please contact us if this is the case.
Only 1 free triwing per order, no matter how many you buy. For those who don't know, a triwing is an special Screwdriver tool needed to open consoles.
The Wiiclip is am AMAZING device. In its short time on the market, its has totally changed the wii modding scene in Australia and around the world. We have a couple of customers that are buying 10, 20, 40+ of these things at a time. We do all the hard work for you, we will solder each one according to the serial numbers you give us, and test them out.
Some Quick Solderless Wiikey 2 info:
- 100% solderless on EVERY model - 100% solderless means 100% solderless (please don't email us ask if it really is....it is!)
- The clip has 2 ways we can solder it on the clip depending on your serial number, so please make sure you enter your serial number in the order comments on checkout!
Wiikey v2 specs (from our website)
What Wiikey 2 does, that pretty much all other modchips do also
- Directly boots 100% of backups from your region)
- Directly boots about 70% of games from other regions, original or backup
What Wiikey does that d2pro and a select few other mochips have:
- 100% original code
- Proven DVD upgrades (a modchip is not really upgradable until it is upgraded!)
- Configuration disc allowing you to change some settings (The drive read speed, allowing or disallowing international games, etc)
- Support from a great team
We ship these all around the world. International shipping starts at $10 for registered post with a signature.
Firstly a warning:
All Wii-Clips that have wiikey v2 soldered to them will be tested. OzModChips.com takes no responsibility AT ALL for any damage you or the wii-clip may cause to your wii during installation, 1 week, or 5 years after 'installing the product'.
What is this thing, I still don't get it?
The Wii-Clip is not a modchip, it is a solderless interface that can be used on all consoles to install the Wiikey 2 wire without wires!
Wiikey 2 has automatic region detection. So that you don't need to do anything special when you get it, except just putting an original game in your console from your region.
Hasn't every single IC-Clip in the past been a horrible failure?
Yeah, pretty much. PS2 ones where terrible. There was a recent Wii one for D2B consoles made by a bunch of Spanish guys. It was terrible....some home made crap.
So what makes this different?
The Wii-Clip is selling pretty cheap, but it is in no way a cheaply made product! The guys that designed it obviously have a very good factory doing this for them. The Wii-Clip hugs the IC so tight that onces its on.....its really on.
How do you install it?
- Open your wii
- Place the solderless wiikey 2 on the IC.
- Partially close the Wii and test.
- Close Wii.
Please see the video here - http://www.ozmodchips.com/wii-solderless-mods-c-7_46.html
What comes inside the packages you offer?
Wii-Clip V14, Original 100% authentic Wiikey 2 soldered on. And of course - a free triwing screwdriver (opening tool)
Important information on warranty:
There is nothing better than actually installing a modchip in your wii with wires. Solder is an extremely strong bond, and installers can give warranty on their work, and on the product. We can only provide a DOA (dead on arrival) warranty on these products. If you are experiencing a problem with your wiiclip you must notify us of this within 7 days of receiving the item. We simply cannot provide a long term warranty on a product that is not installed by us. We will test each each pre-soldered solution before sending the item to you, and this does narrow the chances of it not working, however, by buying this product, you are agreeing that there is only a DOA warranty and OzModChips will not accept returns whatsoever after this period.
